2024 John Deere 3 Series 3043D

MoreLess
Limited Time Offer!

Selling Price -

2024 John Deere 3 Series 3043D

  • Standard 4WD for Maximum Traction
  • Heavy duty drive train with a gear drive transmission 8F/8R
  • On-board diagnostics including Service Advisor
  • Category 1 3-Pt Hitch compatible with dozens of attachments

Features may include:

Reliable gear-driven transmission provides optimum tractor performance

The 3D Tractors are available with a gear drive transmission with eight speeds in both forward and reverse directions. It includes a drivetrain built with heavy-duty components like those used in some John Deere utility tractors. These components ensure a rugged and durable machine.

  • The spiral bevel gear of the 3D machine is larger in diameter than comparable tractors.
  • Column-mounted forward and reverse lever for increased efficiency and comfort when changing directions.
  • Fender-mounted gear shift lever for more comfortable shifting
SAFETY FEATURES OF THE 3D SERIES TRACTORS INCLUDE:
  • The tractor will only start with the forward/reverse, range, and gear shift levers in neutral.
  • The engine will shut off if the operator leaves the seat unless the forward/reverse, range, and gear shift levers are in neutral.
  • The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged.
ERGONOMIC AND OPTIMIZED SHIFT LEVERS

Key John Deere advantage - A column-mounted forward/reverse lever is a more ergonomic alternative to the floor-mounted design of the competition. Having controls at the operator’s fingertips allows for an effortless change in directions at any time.

The 3D is much easier and more comfortable to operate when shifting between gears. The fender-mounted gear shift lever provides the ideal location and placement for the operator’s arm.

Clean and simple operator station is comfortable and convenient

An uncluttered design gives operators of all sizes plenty of room to be comfortable. Color-coded controls are located on either side of the operator.

  • Contoured, comfortable seat enhances operator comfort.
  • Seat position adjusts fore and aft
  • Seat flips forward for protection from the elements
  • Flat operator platform provides for easy entry to/exit from the tractor.
  • Folding Roll-Gard™ rollover protective structure (ROPS) and retractable seat belt increase operator safety.
Operator presence system:
  • If the operator leaves the seat when the forward/reverse and range lever are in gear, the engine shuts down.
  • If the operator leaves the seat when the power take-off (PTO) is engaged, the engine shuts down.
LEFT-SIDE STEP
  • The left-side step allows for easy access on and off the tractor.
  • Foot platform has a non-skid surface for sure footing.
SEAT

The thick, soft padding on this seat provides a smooth and comfortable ride.

  • Seat flips forward for protection from the elements.
  • Adjustable using the fore and aft lever located under the seat, the seat slides on ramped rails to provide comfortable access to all controls.
INSTRUMENTATION

Easy-to-read instrument panel includes the following:

  • Tachometer
  • Low oil pressure indicator light
  • Battery discharge indicator light
  • PTO engagement indicator light
  • Signal/hazard lamp indicator lights
  • Multifunction liquid crystal display (LCD) display (hours, filter cleaning information, PTO speed, etc.)
  • Filter cleaning status indicator light
  • 2024
  • John Deere
  • 3 Series
  • 3043D
  • Compact
  • Model: 3TNV86CT-KJPT
  • gross: 42.2 hp (31 kW)
  • Yanmar
  • 2400 rpm
  • Turbocharged
  • Final Tier 4
  • 3 | Cast-in-block
  • 95.8 cu in. (1.57 L)
  • 3.46 in (88 mm)
  • 3.54 in. (90 mm)
  • Pressurized
  • Water pump
  • Dual element
  • At rated speed: 78 lb-ft (105.7 Nm)
  • Power take-off (PTO) power: 36.3 hp (27.1 kW) | 540 rpm at 2400 rpm
  • Control: Mechanical
  • High pressure common rail direct injection
  • Diesel
  • 8F/8R synchromesh shuttle shift gear transmission | gear ranges: 4 gears and 2 ranges
  • 19.1:1
  • Bull Gear
  • Power steering
  • Wet disk | Transmission
  • Wet disc
  • Farm: 7-14 / Turf: 27x8.5-15 / R4: 25x8.5-14
  • Farm: 11.2-24 / Turf: 41x14-20 / R4: 15-19.5
  • 600 CCA
  • 55 amp
  • Starter size: 1.9 hp (1.4 kW)
  • High pressure common rail direct injection
  • Open center
  • Steering: 4.4 gpm (16.8 L/min) / Implement: 5.9 gpm (22.4 L/min) / 10.3 gpm (39.2 L/min)
  • Single gear
  • 2500 psi (172.4 bar)
  • Category 1
  • Front axle clearance: 14 in. (35 cm)
  • 62 in. (157.4 cm)
  • Without brakes: 5.3 ft (1.63 m)
  • 24-in. behind link arms: 1670 lb (757.4 kg)
  • 9.7 U.S. gal. (36.7 L)
  • 1940 lb (880 kg)
  • 3527 lb (1600 kg)
  • Draft control sensing: Position control | Rollover protective structure Type: Foldable ASABE S478 | Platform - flat/straddle: Semi-flat | Gear shift location - console/floor: Right-hand side
  • Transmission and hydraulic system: 34.8 qt (33 L)
  • 2840 lb (1288 kg)
  • MFWD
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Jeffersonville, New York
  • New
  • 2024
  • John Deere
  • 3 Series 3043D
  • Model: 3TNV86CT-KJPT
  • 8F/8R synchromesh shuttle shift gear transmission | gear ranges: 4 gears and 2 ranges
  • Diesel
  • Available
  • MFWD
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.