AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
Features may include:
Spend more time working and less time switching equipment with easy implement swaps
1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.
AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.
1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.
Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)
The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.
Ideal for loader or mower applications where frequent direction and speed changes are needed
No clutching for fast direction changes
Match the job at hand with infinite ground speeds
Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering
Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.
Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
Photos
Highlights
Jeffersonville, New York
New
2023
John Deere
1 Series 1023E
Model: 3TNM74F-NCJT
23
HYDROSTATIC
Diesel
Available
4WD
Specifications
2023
John Deere
1 Series
1023E
Compact
Model: 3TNM74F-NCJT
Yanmar®
SAE J1995 rated power: 21.5 hp (16 kW) / 21.8 PS at 3200 rpm
3200 rpm
Natural
Compliance: Final Tier 4
Three cylinders | Cast-in-block
60.6 cu in. (0.993 L)
2.91 in (74 mm)
3.03 in. (77 mm)
Pressurized
Water pump
Dual element
At rated speed: 35.2 lb-ft (47.7 Nm)
Power take-off (PTO) power: 14.9 hp (11.1 kW) | Rear: 540 rpm / Mid: 2100 rpm
Control: Independent
Indirect injection
Diesel
23.5:1
Indirect injection
Hydrostatic - two range
Spur gear
Power
Wet disk
Wet disc (left-hand pedal)
R3 Turf: 18x8.50-10 / R4: 18x8.5-10
R3 Turf: 26x12-12 / R4: 26x12-12
500 CCA
40 amp
Starter size: 1.6 hp (1.2 kW)
Open center | Remote control valves available: Three